MICRO-POLYVIEW OPTICS - 3D MEASURMENT AND IMAGING OF SMALL PARTS
Micro-Polyview is a 3D, multi-image lens designed to completely measure and inspect objects whose dimensions range from 1 to 10 millimeters, such as electronic components, solder paste and micromechanics Six different lateral views are provided by an array of mirrors interfaced to a bi-telecentric lens; the top of the object is directly imaged at the center of the field
of view.
The lateral views feature exactly the same magnification and the images remain in perfect focus even when the object is displaced from its nominal position.
All the views can be used to precisely measure the dimension of components from different angles.
Micro-Polyview integrates LED illumination with the most appropriate lighting geometry for this optical configuration.
 |
 |
 |
KEY ADVANTAGES:
- Small parts lateral imaging: inspection of objects whose size ranges from 1 to 10 mm
- Measurement capability: the top and the lateral views show the same magnification
- High field depth: part decentering can be tolerated without significant defocusing
If you wish to receive a quote, just click on the button and submit your inquiry. We'll get back to you in no time!
| P/N | PCMP012 | PCMP023 | |
| Detector Size | 1/2" | 2/3" | |
| Max Inspection Height with diameter 2,5 mm | 6 | 6 | |
| Max Inspection Height with diameter 5 mm | 4,5 | 4,5 | |
| Max Inspection Height with diameter 7,5 mm | 3 | 3 | |
| Max Inspection Height with diameter 10 mm | 1 | 1 | |
| Wavelength range | (nm) | 450 .. 650 | 450 .. 650 |
| Working distance | (mm) | 1,5 .. 5 | 1,5 .. 5 |
| CTF @ 50 lp/mm | (%) | > 40 | > 40 |
| F-number | 8 | 8 | |
| Diameter | (mm) | 119 | 119 |
| Length | (nm) | 262 | 262 |
| Weigh | (g) | 980 | 980 |
| Mount | C | C | |
| Illuminator Voltage | (V, DC) | 24 | 24 |
| Illuminator power consumption | (watt) | 18 | 18 |
| Datasheet & Drawing | PCMP012 | PCMP023 | |
| Get a Quotation |  |
|
|
 |
 |
 |
 |
|
Mechannical components inspection: thread integrity, pitch and diameter can be verified and measured. |
SMD component inspection: integrated circuit position, rotation, pin integrity and bonding can be checked. |
Electronic connector checking: presence/absence, alignment and length of pins can be precisely measured. |
LED quality control: lens scratches, die centering and correct wiring can be inspected and measured. |
 |
 |
 |
 |
The suggested working distance ranges from 1.5 to 5 mm. The best focusing can be achieved by adjusting the number of spacers in the C-mount interface or by vertically positioning the illuminator+mirror assembly.
The image orientation phase can be adjusted by simply rotating the mirror cage or the whole assembly.
The top and side views show exactly the same magnification; however the side views appear to be compressed because of the perspective angle. Thanks to telecentric imaging such compression is purely linear and therefore very easy to compensate.
Customized versions available with:
- different number of views
- different mirror inclination angles
- asymmetric or special mirror arrays
are possible and easily manufacturable.
Opto Engineering
Europe headquarters
Via Cremona 29/2,
46100 Mantova, Italy
Phone: +39 0376 263525
Opto Engineering
USA
served by Texas Industrial Optics Inc.
11261 Richmond Ave
Houston TX 77082 - U.S.A.
Phone: +1 +832 212 9391
Opto Engineering
China
served by Deep View Trading & Service Co., Ltd
Shanghai, Huangpu District,
n. 885 Renmin Rd, room 717
Zip code 200010
Phone: (+86)-21-61356711
www.deepview.cn
Opto Engineering
Germany
Agnes-Pockels-Bogen, 1
80992 München
Deutschland
Tel: +49 (0) 89 18930918
Fax: +49 (0) 89 3234044
BI-TELECENTRIC LENSES
- Matrix Detector TC Lenses
- Large Detector TC Lenses
- Very Large Detector TC Lenses
- Line Scan TC Lenses
- Telecentric Illuminators
- UV Telecentric Lenses
- UV Telecentric Illuminators
- TC Clamping Mechanics
- TC Calibration Patterns
- TC Calibration Software
- TC Optical Bench Kits
- Telecentric Kit Case
- OE Telecentric Filters
Catalogue
Newsletter
Contact
Tutorials
